Cut Guide

Steel rolling cutting guide means that in the steel rolling process, in order to ensure the rolling quality and efficiency, it is necessary to cut the steel billet to be rolled. The cutting guide refers to a device installed at the exit of the rolling mill to guide the billet to be cut at the exit of the rolling mill to ensure that the billet can enter the next process correctly. The cutting guide usually consists of a guide plate and a guide wheel. The guide plate is used to guide the movement direction of the billet, and the guide wheel is used to support and guide the movement of the billet.The design and installation of the slitting guide play an important role in the stability of the rolling process and the quality of the steel. Reasonable cutting guide design can effectively control the movement track of billet, reduce cutting error and improve rolling quality. At the same time, the installation position and angle of the cutting guide also need to be adjusted according to the specific process requirements to ensure that the steel billet can enter the next process smoothly.During the steel rolling process, the slitting guide also requires regular maintenance and inspection to ensure its normal operation. The maintenance work includes cleaning the sundries on the guide plate and the guide wheel, checking the wear condition of the guide plate and the guide wheel, and replacing the seriously worn parts in time. Only by keeping the cutting guide in good condition can the normal cutting and blanking of the steel billet be guaranteed, and the rolling efficiency and quality can be improved.